estuary← ccam.world

← back

Flash Firmware

Load new firmware onto your Estuary hardware directly from the browser. For Windows users, you likely need to install Zadig USB driver before your device will be recognized.

Before you start

  1. 01Use Chrome or Edge — WebUSB is required and not available in Firefox or Safari.
  2. 02Put your device in bootloader mode: EITHER: hold the BOOT button, then plug in USB. Release the button once connected OR hold the BOOT button while pressing the RESET button, then release both buttons.
  3. 03Select your hardware and firmware below, then click Connect device.
  4. 04When the browser prompts you to select a USB device, choose the Daisy device (STM32 BOOTLOADER).
  5. 05Click Flash and wait for it to complete. Do not unplug during flashing.

Firmware source

github.com/Center-Abstract-Concrete-Machines/CCAM-Earth-CPP/releases

Flasher

Hardware

Firmware

Loading firmware list…

© Center for Concrete and Abstract Machines