estuary ← ccam.world

← back

Flash Firmware

Load new firmware onto your Estuary hardware directly from the browser. For Windows users, you likely need to install Zadig USB driver before your device will be recognized.

Before you start

  1. 01 Use Chrome or Edge — WebUSB is required and not available in Firefox or Safari.
  2. 02 Put your device in bootloader mode: EITHER: hold the BOOT button, then plug in USB. Release the button once connected OR hold the BOOT button while pressing the RESET button, then release both buttons.
  3. 03 Select your hardware and firmware below, then click Connect device.
  4. 04 When the browser prompts you to select a USB device, choose the Daisy device (STM32 BOOTLOADER).
  5. 05 Click Flash and wait for it to complete. Do not unplug during flashing.

Firmware source

github.com/Center-Abstract-Concrete-Machines/CCAM-Earth-CPP/releases

Flasher

Hardware

Firmware

Loading firmware list…

© Center for Concrete and Abstract Machines